Loading paper in tray 2 or 3 – Lanier 5705 User Manual
Page 293
                                    Advertising
                                    
                                        
                                    
                                
                                 
B
Loading Paper
279
5
Loading paper in Tray 2 or 3
A
Pull out the paper tray until it stops.
B
Square the paper and set it in the tray.
Important
❒ Do not stack paper over the limit mark.
❒ Make sure that the paper stack is flush with the right side fence.
Note
❒ Fan the paper before placing it in the tray.
❒ If paper is curled or warped, correct the curl or warp before placing it in
the tray.
C
Push the paper tray in until it stops.
                                    Advertising
                    
                        
                    
                            
                            
                    This manual is related to the following products: