Loewe Digital Recorder + - Manual (Page 17)

17 -
english
Archive playback
If you have jumped past the desired part of the recording, jump in the
opposite direction. Briefl y press the button
. This jump in the opposite
direction is only carried out for half the jump distance. Now press  to
jump back out of the area that is to be hidden.
If in the process you jump past the place where you want to start the hide
process, then jump forward using
. In the process, the jump distance is
cut in half again.
By cutting the jump distance in half when changing the jump direction, you
can feel your way up close to a particular section.
The pre-set jump distance is reinstated if you jump more than three times in
the same direction or if the Digital Recorder display disappears.
Fast forward and rewind
You can fast forward and rewind at three different speeds during archive
playback. No sound is audible during winding.
Press the Fast Forward  or Rewind  button a little
longer.
Increase speed: press again briefl y.
The speed increases every time you press the button until
eventually switching back to the initial speed.
Press the Play button  when you reach the point from
which you want to continue watching.
You will see a freeze picture when you reach the end of the recording.
When rewinding reaches the beginning, the Digital Recorder switches to
playback mode.
Playing highlights
If there are manually set bookmarks in the current playback, they can be
played as highlights one after the other automatically. 30 seconds before and
after the set bookmark are played.
The highlights are numbered chronologically and displayed consecutively, i.e.
the playback always starts with highlight 1 again. The playing of highlights
can be terminated by pressing the Stop button
.
Show the drive display.
Press the Play button for “Highlights”.
Start playing highlights. As long as this drive display is shown, you jump to
the next highlight with the blue coloured key and to the previous highlight
with the red coloured key. You can also jump to the next highlight by press-
ing the Play button
again. This function is also available if no drive display is
shown. Pressing the Stop button ends playing the highlights.
Jumping
If a jump distance has been set, you can jump by briefl y pressing the drive
buttons
.
jump forwards ...
... or backwards
Smart jump
The Smart jump function is included to enable fast and easy access to a
certain place within the recording which is currently being played. The factory
default setting has Smart jump switched on.
When Smart jump is switched on, the jump distance is cut in half after each
change in the jump direction while jumping.
The playback symbol  is yellow when the Smart jump function is active.
For instance, you are searching for the beginning of the section where a por-
tion of the recording is to be hidden.
In this case, for example, press the button
 several times to jump forward
(pre-set jump distance).
00:00 00:25 00:59
Bookmark Highlights Bookmark ➝
➝
Archive 03.08. Der Wilde Westen
00:00 00:23 00:59
Bookmark Highlights Bookmark ➝
➝
Archive 03.08. Der Wilde Westen
00:00 00:19 00:59
Archive 03.08. Der Wilde Westen
00:00 00:19 00:59
Archive 03.08. Der Wilde Westen
00:00 00:34 00:59
Archive 03.08. Der Wilde Westen
00:00 00:35 00:59
Bookmark Highlights Bookmark ➝
Archive 03.08. Der Wilde Westen
➝
00:00 00:01 00:59
Bookmark Highlights Bookmark ➝
➝
Archive 28.08. Fußball-WM Deutschland-Polen
00:00 00:09 00:59
Highlight Highlights stop Highlight ➝
➝
Archive 28.08. Fußball-WM Deutschland-Polen Highlight 1
END
or