User’s choice functions, U1: auto panel reset function, U2: sleep function – Lanier 5415 User Manual
Page 52: U3: disable sleep function, User’s choice functions -4
User’s Choice Functions
5 - 4
User Mode
User’s Choice Functions
U1: Auto Panel Reset Function
Sets the period before the Auto Panel Reset Function is enabled after a copy job is completed.
One setting allows you to disable the Auto Panel Reset Function entirely.
U2: Sleep Function
Sets the period before the Sleep Function is enabled after a copy job is completed.
Note: Be sure to select the U3 User’s Choice Function (Disable Sleep Function)
to completely disable this function.
U3: Disable Sleep Function
Completely disables the Sleep Function Mode.
Code
Setting
Default
oF
Auto Panel Reset Function is not enabled.
05
Auto Panel Reset Function is enabled after 30
seconds.
1
Auto Panel Reset Function is enabled after 1 minute.
2
Auto Panel Reset Function is enabled after 2
minutes.
3
Auto Panel Reset Function is enabled after 3
minutes.
4
Auto Panel Reset Function is enabled after 4
minutes.
Code
Setting
Default
oF
Sleep Function is not enabled.
1
Sleep Function is enabled after 1 minute.
:
:
15
Sleep Function is enabled after 15 minutes.
:
:
120
Sleep Function is enabled after 120 minutes.
Code
Setting
Default
1
Turns OFF the Disable Sleep Function Mode.
2
Enables the Disable Sleep Function Mode.