Lanier 5415 - Manual (Page 65)

Correcting Functional Problems
Service and Supplies 6 - 3
Correcting Functional Problems
Note: If these procedures do not correct the problem, turn OFF the Power Switch,
unplug the power cord from the power outlet and contact your Technical
Representative.
Symptom Possible Cause Action
Nothing is displayed on the
Control Panel.
Does the green light in the
Start Key turn on?
The Sleep Function has
been enabled. Press the
Start Key to disable this
mode.
Nothing happens when the
Start Key is pressed.
Has an Error or Trouble
Indicator become lit?
Follow the procedures
provided.
Has the machine just been
turned on?
The machine is warming up.
Please wait a few moments.
The machine will not turn
ON.
Has the power cord been
unplugged?
Plug in the power cord.
The circuit breaker for the
room is open.
Close the circuit breaker.
The green light of Start Key
will not turn OFF
immediately.
Do you turn off the Power
Switch in sleeping mode?
In Sleeping mode, it will
take 23 seconds to turn off
the green light of Start Key.