Lanier 5415 - Manual (Page 64)

Improving Image Quality
6 - 2 Service and Supplies
Unintended markings appear
along the edges of the copy.
The Original Pad is dirty. Wipe the Original Pad clean
with a soft cloth.
The selected paper size is
larger than the original
document (zoom ratio is set
to full size 100%)
Specify a paper size that is
appropriate to the original
document.
The original document is not
placed in the proper
orientation on the Original
Glass (zoom ratio is set to
full size 100%)
Place the original document
correctly on the Original
Glass.
The zoom ratio setting does
not match the size of the
original document.
Select a suitable zoom ratio
setting.
The copy appears uneven or
at a tilt.
The original document has
not been set properly.
Set the scale of the original
document properly.
Adjust the Document Guide
Plates properly when the
original document is placed
into the Automatic
Document Feeder.
There is an obstruction on
the Original Glass (when
using the Automatic
Document Feeder).
Remove the obstruction and
wipe the Original Glass clean
with a soft cloth.
Symptom Possible Cause Action