System configuration, General – LevelOne WAB-1000 User Manual
Page 20
Advertising
15
NOTE:
You will be asked for your user name and password. The default is "
crypto
" with
the password "
officer
" to give full access for setup configuration. (This password is case-
sensitive.)
System Configuration
General
You will immediately be directed to the System Configuration—General page for the
WAB-1000 access point.
This screen lists the firmware version number for your WAB-1000 and allows you to set the
Host Name and Domain Name as well as establish system date and time. (Host and Domain
Names are both set at the factory for “default” but can optionally be assigned a unique name for
each.) When you are satisfied with your changes, click Apply.
Advertising