LaCie LaCinema HD Connect - Manual (Page 13)

LaCinema HD Connect Introduction
User Manual page 13
1.7. Power Management
LaCinema Mini HD Connect will start as soon as the power supply
is connected.
Power modes
By default, the LaCinema HD Connect is set to Instant ON mode,
which means that when you press the power button on the remote
control (
Fig. 08 ) or the standby button on the front of the drive ( Fig.
09 ), the user interface will turn off but the drive will remain avail-
able for network connections (including file and UPnP/DLNA server
features).
Alternatively, you can put the drive in low power mode from the
user interface. Go to the Shut Down menu in the Settings Space
and choose
Shut Down . This mode will turn off the user interface,
attached hard disk (if connected), and network services (including
UPnP/DLNA server features).
Disconnecting the power supply
Always enter low power mode by navigating to the shutdown menu
in the Settings Space before disconnecting the power supply. This
will prevent hard disk corruption.
Fig. 08
Fig. 09