LevelOne 2-Bay SATA HDD w/ Gigabit Ethernet FNS-5000B - Manual (Page 22)

22
B. Connect FNS-5000B by the network
1. Please go to Network settings to check and write down the subnet and router address of
your Mac. Then select Using DHCP.
Note: If you are not sure about the network settings, please contact your
network administrator or ISP.
2. Connect FNS-5000B to your Mac by a cable. Open a web browser and enter the default
IP address of FNS-5000B.
Default IP address of FNS-5000B: http://169.254.100.100:6000
Note: Please use the browser Safari in Mac to access FNS-5000B.