LevelOne 2-Bay SATA HDD w/ Gigabit Ethernet FNS-5000B - Manual (Page 70)

70
3.8.4. System Update
Note: If the system is running properly, you do not need to update the
firmware.
Before updating system firmware, please make sure the product model and firmware version
are correct. Follow the steps below to update firmware:
Step 1: Download the release notes of the same version as the firmware from LevelOne
website http://www.level1.com/. Read the release notes carefully to make sure you need to
upgrade the firmware.
Step 2: Before upgrading system firmware, back up all disk data on the server to avoid any
potential data loss during system update.
Step 3: Click the [Browse…] button to select the correct firmware image for system update.
Click Update System to update the firmware.
Note: System update may take tens of seconds to several minutes to complete depending on
the network connection status. Please wait patiently. The system will inform you when
system update is completed.