LevelOne 2-Bay SATA HDD w/ Gigabit Ethernet FNS-5000B - Manual (Page 24)

24
4. Go to TCP/IP Configuration of Network Settings . Select to use static IP and
input the IP address of FNS-5000B. Make sure the value does not conflict with the IP
address of your Mac and other devices in LAN. Configure the subnet mask and default
gateway of FNS-5000B to the same as subnet mask and router address of Mac which
you set in Step 1. Click Apply to confirm.
Note: When using static IP, please make sure your Mac and FNS-5000B
are in the same subnet. If you are not sure about the settings, please
contact your network administrator or ISP.