LSI PCI to USB Host Adapter 60800 - Manual (Page 5)

LSI60800 PCI to USB Host Adapter 3
4. Remove the LSI60800 Board from the antistatic bag and insert the
edge connector into the PCI slot, as pictured in Figure 2. Make sure
the edge connector is properly aligned before pressing the board into
place. Apply even pressure to both ends of the board while inserting it.
5. Visually check to make sure the LSI60800 Board is properly seated,
and is all the way down in the PCI slot.
6. Screw the bracket down with the screw from step 3.
Figure 2 Inserting the LSI60800 Board