LSI PCI to USB Host Adapter 60800 - Manual (Page 6)

4 LSI60800 PCI to USB Host Adapter
3 LSI60800 Software Installation
The LSI60800 Host Adapter is supported by Microsoft embedded drivers
for Windows 98.
After installing the LSI60800 Board, restart the computer.
A sequence of windows will appear briefly one after the other.
First the New Hardware Found window will appear.
Then the next window will indicate that the LSI Logic LSI61C102 USB
Host Controller is the device that was found.
Then a window will indicate that the Controller is an unknown device.
Then the New Hardware Found Root Hub window will be displayed.
The System Properties window will be the last window to be displayed
and will remain on screen.
3.1 Verifying the Installation
To check for correct installation, open the Device Manager using the
following procedure, and verify that the LSI60800 PCI to USB Host
Adapter is working correctly.
1. From the Windows 98 Start menu, select Settings, then Control
Panel
.
2. From the Control Panel window, double-click the System icon. The
System Properties menu displays.
3. Select the Device Manager tab.
4. Click on the “+” box next to “Universal Serial Bus Controller”.
Figure 3 shows a properly installed USB card.