Lowrance electronic Lowrance iFINDER H2O C - Manual (Page 47)

39
The Transfer My Data submenu asks if you want to save data to the
MMC or load data from the MMC into the iFINDER's memory.
2. The Transfer My Data menu includes a message which tells you if an
MMC is present or not. If no MMC is present, you must insert a card
into the iFINDER to activate the Load or Save commands.
To transfer data from the iFINDER to the MMC, press ENT .
To transfer data from the MMC to iFINDER, press
→ to
L OAD
| ENT .
3. Saving: To accept the default name Data for the GPS Data File,
press
↓ to
S AVE
| ENT . If you wish to rename the file (as in the example
below), press ENT to activate the selection box. Press
↑ or ↓ to change
the first character, then press
→ to the next character and repeat until
the name is correct. Then, press ENT |
↓ to
S
AVE
| ENT .
The unit will display first a progress then a completion message when
the data transfer is finished. To return to the Page view, press
EXIT | EXIT .
These figures (from left to right) show the menu sequence for naming
and saving a GPS Data File from an MMC to the iFINDER's memory.
4. Loading: There may be more than one GPS Data File (*.USR) on the
card. To select a file, press
ENT to activate the selection box, use
↓ or ↑
to highlight the file, then press ENT to accept the selection. Next, press
↓ to
L OAD
| ENT . The unit will display a completion message when the
data transfer is finished. To return to the Page view, press EXIT | EXIT .