Lowrance electronic Lowrance iFINDER H2O C - Manual (Page 58)

50
1. Press MENU |
↓ to
D
ELETE
M
Y
I
CONS
| ENT .
2. Press
↓ to
D ELETE A LL I CONS
, D ELETE B Y S YMBOL
or D ELETE F ROM M AP
and
press ENT .
Delete icons menu.
Load GPS Data Files from an MMC
GPS Data files, containing waypoints, routes, trails and event marker
icons, must be copied from an MMC to the iFINDER's internal memory
before the iFINDER can read them. Here's how:
1. Press MENU | MENU |
↓ to
S YSTEM S ETUP
| ENT |
↓ to
T RANSFER M Y D ATA
| ENT
and the screen below appears.
The Transfer My Data menu asks if you want to save data to the MMC
or load data from the MMC into the iFINDER's memory.
2. The Transfer My Data menu includes a message which tells you if a
MMC is present or not. If no MMC is present, you must insert a card
into the iFINDER to activate the
L OAD
or S AVE
commands.
To load data from the MMC to the iFINDER, press
→ to
L
OAD
| ENT .
3. Loading: There may be more than one GPS Data File (*.USR) on the
card. To select a file, press
ENT to activate the selection box, use
↓ or ↑ to
highlight the file, then press ENT to accept the selection. Next, press
↓ to