Lowrance electronic Lowrance iFINDER H2O C - Manual (Page 70)

62
Create a Waypoint by Projecting a Position
This feature sets a waypoint at a point located a specific distance and
bearing from a reference position. The reference position can be a
highway exit, a map place or an item from your waypoints list.
1. Press ENT |
↓ to
P
ROJECTED
P
OSITION
| ENT |(cursor jumps to highlight
C REATE
)| ENT .
2. Press
↓ to
C HOOSE R EFERENCE
| ENT . Use
↑ and ↓ to select a waypoint,
map place or highway exit and press ENT . After choosing a category, its
internal menu will pop up. Select a reference point from the internal
menu and press
ENT . Its position will appear as the reference position
on the map.
3. Press
↑ to
D ISTANCE
| ENT . Press
↑ or ↓ to change the first character,
then press
→ to the next character and repeat until the distance is cor-
rect. Press ENT .
4. Press
↑ to
B
EARING
| ENT . Press
↑ or ↓ to change the first character,
then press
→ to the next character and repeat until the bearing is cor-
rect. Press ENT .
5. Press
↑
to P
ROJECT
| ENT . The Edit Waypoint menu appears. You can
save the new projected waypoint by pressing EXIT | EXIT or you can edit
the waypoint. (Press EXIT | ENT if you want to immediately begin navi-
gating to the new waypoint.)
Select a Waypoint
To select a waypoint on the map (for navigating or editing, etc.) use the
arrow keys, centering the cursor over the waypoint. A red border will
appear around the waypoint.
Delete a Waypoint
To delete a waypoint, press
FIND |
↓ to
M
Y
W
AYPOINTS
| ENT . Press ENT |
↓
to waypoint name| ENT |
→ to
D
ELETE
W
AYPOINT
| ENT |
←
to Y
ES
| ENT . To
return to the main page display, press EXIT repeatedly.
Edit a Waypoint
Waypoint Name
To edit a waypoint name, press FIND
↓ to
M
Y
W
AYPOINTS
| ENT . Press
ENT |
↓ to desired waypoint name|
ENT |
→ to
E
DIT
N
AME
| ENT . Use the
↑
and
↓
keys to select the first character, then press
→ to move to the
second character and so on. To return to the main page display, press
EXIT repeatedly.
Waypoint Symbol
To edit waypoint symbol, press FIND |
↓ to
M
Y
W
AYPOINTS
| ENT . Press
ENT |
↓ to desired waypoint name|
ENT |
→ to
E
DIT
S
YMBOL
| ENT . After the