Linksys FESWSK05 v3 User Manual
Page 14
Fast Ethernet Switched 10/100 Network In a Box
22
Instant EtherFast
®
Series
21
11. Windows NT will copy the necessary
network drivers to your PC. When the
copying is complete, you will see a list
of installed bindings. Change the bind-
ings settings if needed and click Next.
Click Next again.
12. Choose either Workgroup or Domain, depending on the type of network
you're setting up. (Your Microsoft documentation explains the difference
between Workgroups and Domains.) Click Next.
N
No
otte
e:: For information and help on
choosing your bindings, services
and protocols, ask your network
administrator, or check your
Windows NT documentation.
8. A list of services will appear. Click Next to approve these services, fol-
lowed by Next again.
9. Windows NT will probably ask you to supply your original Windows NT
CD-ROM or setup disks. If so, place your Windows NT CD-ROM in your
CD drive. If the CD-ROM loads a pop-up window, close it. Type
D:\i386
(or the appropriate CD-ROM drive letter) in the box and click
Continue.
10. Windows NT will ask you to choose a media type for the EtherFast
®
card.
Choose AutoSense. You can change these settings later if necessary.
When finished, click OK.