Linksys FESWSK05 v3 - Manual (Page 19)

Instant EtherFast ® Series
7. The Completing the Found New Hardware Wizard dialog box will
appear, indicating that the driver has been successfully installed. Click
Finish.
8. Remove the driver disk from the floppy drive.
The Windows 2000 driver installation is complete. If you want to share
files or printers, refer to your Windows 2000 documentation or check
with your system administrator. Return now to the section called
Installing the Workgroup Switch to complete the installation of your
Network In A Box.
Configuring the LAN Card
1. Once you are back at the Windows desktop, click on your taskbar's Start
button, then Settings, then Control Panel, and then double-click the
Network icon.
2. The Network window will appear. Click on the Configuration tab. A
window similar to the one below will appear. There may be other compo-
nents listed in addition to the ones shown below (for example, a Dial-up
Adapter), which is normal. If any of the components shown below are
missing, however, you’ll need to manually install them. Refer to Manually
Installing the Network Components for more information.
• Client for Microsoft
Networks
• Linksys LNE100TX(v5)
Fast Ethernet Adapter
• IPX/SPX-compatible
Protocol
• NetBEUI
• TCP/IP
Configuring the LAN Card for Windows 95, 98,
and Millennium
Fast Ethernet Switched 10/100 Network In a Box
32 31