Hardware setup, 1 front view – Lindy 39401 User Manual
Page 10
LINDY CPU IP Access Switch
User Manual
6
2. Hardware Setup
2.1 Front View
1. Reset / Firmware Upgrade Switch
• Pressing and holding this switch in while powering ON the CPU IP ACCESS SWITCH resets it to the
factory default firmware level
• After the CPU IP ACCESS SWITCH has been powered ON, pressing and holding this switch in for more
that two seconds performs a system reset
Note: This switch is recessed and must be pushed with a thin object – such as the end of a paperclip, or a
ballpoint
pen.
2. 10/100 Mbps Data LED
• The LED lights GREEN to indicate 10 Mbps data transmission speed
• The LED lights ORANGE to indicate 100 Mbps data transmission speed
3. Link LED
Flashes GREEN to indicate that a Client program is accessing the device.
4. Power LED
Lights when the CPU IP ACCESS SWITCH is powered up and ready to operate.