Lindy 39401 - Manual (Page 37)

LINDY CPU IP Access Switch User Manual
33
4.5 Connecting
To connect to a CPU IP ACCESS SWITCH unit:
1. If it is in the CPU IP ACCESS SWITCH List, Click it; if you are using the CPU IP ACCESS SWITCH IP
input box, specify the IP address and Port number, then Click Open. A Login dialog box appears:
2. After you key in a valid Username and Password, Click OK.
The program attempts to contact your selected CPU IP ACCESS SWITCH unit.
3. Check the Message List window for status messages regarding the operation’s progress.
4. Once contact with the CPU IP ACCESS SWITCH has been established, the Switch to Remove View button
becomes active. Click it to connect to the CPU IP ACCESS SWITCH and take over console control of the
unit that is connected to it.