Lindy 39401 - Manual (Page 34)

LINDY CPU IP Access Switch User Manual
30
Configuring the Hotkeys:
If you find the default Hotkey combinations inconvenient, you can configure them to whatever suits your taste, as
follows:
1. With the Hotkey Setup screen open, highlight the Action, then Click Start
2. Key in the Function keys (one at a time). The key names appear in the Key field as you press them
3. When you have finished keying in your sequence, Click Stop
4. Click
Set
5. Repeat for any other actions you wish to set up
Note: 1. Only the F1 - F12 function keys can be used for these hotkeys
2. You can use the same function keys for more than one action, as long as the first key is not
the same. For example, you can use F1 F2 F3 for one action; F2 F1 F3 for another; F3 F2 F1 for a
third, etc.