Lincoln Electric POWER MIG SVM167-A - Manual (Page 68)

TROUBLESHOOTING AND REPAIR F-32 F-32
POWER MIG® 215
1. Place the new wire drive assembly into its
proper position.
2. Connect plug J4.
3. Maneuver assembly back into its original
position.
4. Replace all mounting screws previously
removed.
5. Using a 3/4” nut driver, replace the thick
black lead previously removed.
6. Reconnect the gas hose to the wire drive
assembly.
7. Close case wrap around cover.
WIRE DRIVE MOTOR ASSEMBLY REPLACEMENT (Continued)
Return
to
Section
T
OC
Return
to
Section
T
OC
Return
to
Section
T
OC
Return
to
Section
T
OC
Return
to
Master
T
OC
Return
to
Master
T
OC
Return
to
Master
T
OC
Return
to
Master
T
OC