LevelOne MUS-2500 - Manual (Page 27)

27
3. Select Job Index to indicate the backup jobs that you wish to execute.
4. Click Execute Now button to start selected backup jobs.
5.2 Backup Setting
5.2.1 Method Setting
Click Backup Method tab and fill out the following setting:
1. In the Backup Job Name field type a name to be assigned to the backup job that you
wish to create.
2. Select a backup method either using compression or directly copying for the job.
‰ Backup without compression: directly copy the specified files to the destination path.
„ Backup Type field
- Copy and replace files: Copy all selected files and folders to the destination path and
replace them, which have the same name as the files to be added.
- Update files: Update the selected files which are present in the destination path, but
the unselected files will be skipped. This method will also copy the selected new files
to the destination path.
"
-------------------------------------------------------------------------------------------------------
Note: By default, the SmartUSB utility uses this option to back up your data. If
you have no desired option, it is a good idea to select this backup type,
which can address most events.
- Freshen existing files: Update the specified files which are present in the destination
path, but the unspecified files will be skipped.
"
-------------------------------------------------------------------------------------------------------
Note: If this is your first time to perform the SmartUSB utility, we do not suggest