Lexmark Z53 - Manual (Page 34)

•
•
•
•
•
Chapter 4 30 30 30 30
Paper misfeeds or jams Paper misfeeds or jams Paper misfeeds or jams Paper misfeeds or jams
Paper misfeeds or pulls multiple sheets while
moving through the printer
Make sure:
•
You are using a paper recommended for inkjet printers.
•
You do not force the paper down into the printer when you
load it. Align the top of the paper with the paper alignment
guides on the paper support.
• You do not load too much paper in the sheet feeder.
Depending on the thickness of your paper, the sheet feeder
can hold up to 100 sheets of paper.
•
The left paper guide is against the side of the paper and it
does not cause the paper to bow in the sheet feeder.
•
The printer is on a flat, level surface.
Printer does not feed envelopes or specialty
papers
If regular paper feeds without problems, make sure:
• You are loading the envelopes correctly. For help, see
“Loading specialty papers” on page 3.
•
You are using an envelope size supported by your printer, and
it is selected in Printer Properties.
•
Your application is designed to print envelopes. Check the
user’s documentation that came with your application.
Printer has a paper jam
Try removing the paper from the sheet feeder. If the paper is
lodged too far into the printer and can’t be removed:
1111 Press the Power button to turn the printer Off.