Lexmark Z53 - Manual (Page 35)

TTTTrrrr
oooo
uuuu
bbbb
lllleeee
sssshhhh
oooo
oooo
ttttiiiinnnn
gggg
•
•
•
•
•
Troubleshooting 31 31 31 31
2222 Pull firmly on the paper to remove it. If you cannot reach
the paper because it is too far into the printer, raise the
front cover and pull the paper out.
3333 Close the front cover.
4444 Press the Power button to turn the printer On.
5555 Resend your document to print.
Document prints with mistakes or poor quality Document prints with mistakes or poor quality Document prints with mistakes or poor quality Document prints with mistakes or poor quality
Vertical straight lines are not smooth
To improve the print quality of vertical straight lines in tables,
borders, and graphs:
•
Select a higher Print Quality setting.
•
Test the cartridge alignment. For help, see page 24.
•
Clean the print nozzles. For help, see page 25.
Characters are missing or unexpected
• Make sure your Lexmark printer driver is selected as the
default printer.
•
Your printer may have two-way communication problems.
For help, see page 28.
Printed pages have alternating bands of light
and dark print (intermittent printing)
• Make sure Enable Buffer Mode is selected on the Options
tab of the Control Program.
•
Select High (1200 x 1200 dpi) or Maximum (2400 x1200
dpi) Print Quality on the Document/Quality tab of Printer
Properties.
• Your printer may have two-way communications
problems. For help, see page 28.