7 operation with a typical configuration set – LEICA GPS1200 User Manual
Page 60
Advertising
60
GPS1200+
Operation
3.7
Operation with a Typical Configuration Set
)
The example given is for static operations.
Static operations
step-by-step
Step
Description
1.
Set up the equipment.
)
Always fill out a field record sheet for each point.
)
It is vital that the antenna height is measured correctly. Measure the height
at the beginning and at the end of the occupation.
)
The Satellite Settings of the GX1230+ GNSS accomodates three addi-
tional fields: <GLONASS:> (selection Yes or No), <Galileo:> (selection
Yes
or No) and <GPS L5:> (selection Yes or No).
2.
Start the Survey application program.
3.
SURVEY Survey Begin
<Job: Default>
<Coord System: WGS 1984>
<Codelist: <None>>
<Config Set:>
Select a configuration set for static operations.
Advertising