LEICA GPS1200 - Manual (Page 72)

72 GPS1200+ Reference Station
Click on POWER DOWN in the Web Interface Tools menu.
Behaviour when
turning off and on Turning the GRX1200+ Series off and on again resets the receiver. The conse-
quences are:
•
If the configuration of the output is stored in the configuration set, standard
NMEA messages are still output.
• All data/message outputs scheduled via OWI or LB2 commands are no longer
output.
• Data logging parameters and interface configuration options, that have been set
by OWI or LB2 commands and have not been saved to a configuration set using
the corresponding OWI or LB2 command, are reset.
Behaviour after
power failure
After temporary power failure, the GRX1200+ Series will automatically power itself
up and resume the previously set operations including OWI or LB2 output. Two
power fail recovery options are available - Sudden Loss Only and Always. To
access the configuration select either:
•
RX1200: Main Menu: Config...\General Settings...\Start Up & Power Down.
• Computer: Configuration - Start Up & Power Down in the web interface.