LEICA GPS1200 - Manual (Page 80)

80 GPS1200+ Reference Station
9.
CONFIGURE Set NET Port
<User: Server>
Configure the NET port number and access control.
10. CONT (F1) to return to CONFIGURE Remote Interfaces.
11. Is Remote displayed in the column Interface for the selected NET port?
• If yes, continue with step 13.
• If no, continue with step 12.
12. USE (F6) and YES (F6) to close other interfaces configured on this port.
13. Press CONT (F1) twice to return to GPS1200+ Main Menu.
)
The receiver is ready to accept an incoming call from a remote application.
14. Connect the receivers RJ45 connector NET to a LAN using a suitable
network cable.
Step Description