Checking the printer status – Lexmark 5300 Series User Manual
Page 136
3
From the Quality/Copies tab, select:
•
Photo when printing photos
•
Normal when printing transparencies
A
LIGN
THE
CARTRIDGES
1
Do one of the following:
•
In Windows Vista, click
Control Panel.
•
In Windows XP or 2000, click Start.
2
Click Programs or All Programs Lexmark 5300 Series.
3
Click Solution Center.
4
Click the Maintenance tab.
5
Click Align to fix blurry edges.
White lines appear in graphics or solid black areas
A
DJUST
THE
Q
UALITY
/S
PEED
SETTINGS
•
For excellent print quality and reduced print speed, select Photo.
•
For good print quality and average print speed, select Normal.
•
For reduced print quality and faster print speed, select Quick Print.
A
DJUST
THE
PROGRAM
SETTINGS
FOR
THE
DOCUMENT
Use a different fill pattern in the program. For more information, see the program documentation.
P
ERFORM
MAINTENANCE
ON
THE
CATRIDGES
You may need to clean the print cartridge nozzles.
Checking the printer status
Windows Vista users only
1
Click
Control Panel Printer.
2
Make sure:
•
The printer icon does not say Paused. If the printer is paused, right-click the icon, and then click Resume
Printing.
•
The printer icon says Ready. If it says Offline, right-click the icon, and then click Use Printer Online.
•
The printer icon has a check mark indicating that the printer is set as the default printer. If it is not, right-click
the icon, and then click Set as Default.
Troubleshooting
136