Setting up the printer for standalone use – Lexmark 5300 Series User Manual
Page 18
Advertising
Setting up the printer for standalone use
1
Unpack the printer.
Notes:
•
Place the printer near the computer during setup. If you're setting up on a wireless network, you may move
the printer after setup is complete.
•
You may need to purchase a USB cable separately.
•
The printer may ship with two CDs.
2
Remove all tape and packing material from all areas of the printer.
3
Raise the control panel.
4
If needed, install the correct control panel for your language.
Setting up the printer
18
Advertising