Lowrance electronic 3600C - Manual (Page 122)

116
B. To find the waypoint, press
↓ to
F
IND
O
N
M
AP
| ENT . The Map Page
appears with the cursor highlighting the found waypoint.
Waypoint Information screens with the Go Waypoint command se-
lected, left, and the Find on Map command selected, right.
To clear these menus and return to the previous page, press EXIT repeatedly.
5. If you're looking by name, there are two options: A. You can spell
out the name in the top selection box. Press
↑ or ↓ to change the first
letter, then press
→ to move the cursor to the next letter and repeat
until the name is correct, then press ENT | ENT . B. Or you can jump
down to the lower selection list by pressing ENT , then press
↓ or ↑ to
select a waypoint from the list, then press ENT . The waypoint informa-
tion screen appears.
Find By Name menu, left. Waypoint Information screen, center. At right,
the found waypoint is highlighted by the cursor on the Map Page.
A. To navigate to the waypoint, press ENT . (Go Waypoint command is
already highlighted.) The unit will show navigation information to the
waypoint.
B. To find the waypoint, press
↓ to
F
IND
O
N
M
AP
| ENT . The Map Page
appears with the cursor highlighting the found waypoint.