Lowrance electronic 3600C - Manual (Page 96)

90
To display a Navionics chart:
1. Install the Navionics MMC in the memory card compartment and
turn on the unit. (For full card install instructions, see Sec. 2.)
2. From the Map Page, press MENU |
↓ to
M AP D ATA
| ENT |
↓ to
M AP
C
HOICE
| ENT . Select the Map Name, then press ENT | EXIT | EXIT .
Navionics Map Choice highlighted. Press Ent to select the desired
Navionics map from the Map Choice drop down box.
WARNING:
You should never format the MMC containing your
Navionics chart. Formatting the MMC will permanently
erase the chart from the card.
NMEA 2000
On the GPS menu, the NMEA 2000 entry provides a way to monitor,
configure and calibrate devices on the LowranceNET. For more infor-
mation, see the document, Using LowranceNET

NMEA

2000 Devices
with LMS-334, LMS-339 and GlobalMap

3600. If the document is
missing, download it free at www.lowrance.com or contact customer
service.
Overlay Data
On any Page display but Status you can float additional data of your
own choosing in your display window. For example, if you left your
watch at home, you could add the local time to your display. Or, if you
wanted to see details about your route and trip, you could show your
bearing, course, average speed and trip distance.
The various data available from your unit are divided into categories in
the Overlay Data menu. These categories include GPS Data, Naviga-
tion, Trip Calculator, Time and Miscellaneous Data.