Lennox Hearth SPECTRA CI1000HT - Manual

NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
HEARTH PRODUCTS
KITS AND ACCESSORIES
775,092M
REV. B 09/2007
Spectra™ Wood Stoves Window Trim Kits
INSTALLATION INSTRUCTIONS FOR WINDOW TRIM KITS FOR USE
WITH SPECTRA MODELS CI1000HT AND CI2000HT WOODSTOVES
DR
AF
T
09
-12
-20
07
KIT CONTENTS
1 ea. Window Trim Kit
1 ea. Instruction Sheet
6mm Braided Rope Gasket
TOOLS REQUIRED
Scissors
Glass Cleaner and Soft Cloth
WARNING
INSTALL ONLY WHEN APPLIANCE IS COLD!
Figure 1
WINDOW TRIM KITS
Cat. No. Model Description Where Used
41M2401 WTK-CI10 Charcoal Trim CI1000HT
41M2001 WTK-CI20 Charcoal Trim CI2000HT
Table 1
INSTALLATION INSTRUCTIONS
Step 1. Cut Top Rope Gasket - Turn the door trim casting face down so
that the attachment clamps are fully visible. Measure the braided
rope gasket so that it is roughly the same length as the arched top
surface of the casting, and cut with scissors (see Figure 1).
Step 2. Cut Bottom Rope Gasket - Measure the rope gasket against the
bottom edge of the casting and cut (see Figure 2).
Step 3. Peel Off Tape - Peel the paper backing off of the gasket adhesive
(see Figure 3).
Step 4. Install Lower Rope Gasket - Place the lower rope gasket along the
bottom edge of the casting and press down firmly (see Figure 4).
1
Figure 2
Figure 3
Figure 4
Cut Bottom
Rope Gasket
Cut Top
Rope Gasket
Peel Off Tape
Install Lower
Rope Gasket