Lindy 70570 - Manual (Page 3)

- 3 -
o
Wake-on-LAN and remote wake-up support
o
Microsoft® NDIS5 Checksum Offload (IP, TCP, UDP) and largesend offload support
o Supports Full Duplex flow control (IEEE 802.3x)
o Supports IEEE 802.1Q VLAN tagging
o
8K Transmit FIFO and 64K Receive FIFO support
o Supports power down/link down power saving
1.1.3. USB Interface
Provides three USB2.0 / USB1.1 ports (2 External + 1 Internal).
Compliant with Universal Serial Bus Specification Revision 2.0 (Data Rate
1.5/12/480 Mbps).
Compliant with Open Host Controller Interface Specification for USB Rev 1.0a.
Compliant with Enhanced Host Controller Interface Specification for USB Rev
0.95, All USB ports can handle high-speed (480 Mbps), full-speed (12 Mbps),
and low-speed (1.5 Mbps) transaction.
1.2. Package Contents
Gigabit LAN + USB 2.0 PCI Host
This User’s Manual
Low Profile PCI Bracket
Driver CD
2. Software Installation
2.1. Windows 2000 installation
1. Power up the system, and insert the Driver CD into your CD-ROM/DVD.
(Note: Do not install combo card before installing USB drivers in windows)
2. Browse the Driver CD, and points specify a location, example E:\USB2.0
Host\NEC\Win2K_XP\U2v2_1_4.exe
3. Double click on the “U2v2_1_4” icon, the USB 2.0 Driver V2.1.4 setup dialog
Will appear, when setup has finished, select “NO, I will restart my computer”. Click on
“close” button to exit the wizard, and power off the system.
4. Insert Combo Card into an available PCI slot, and power up the system.