Lindy CPU SWITCH - Manual (Page 23)

LINDY ELECTRONICS LTD Installation & Use – English Guide Page 23
For example, consider a situation where two LINDY CPU Switch units are connected together (as
shown in figures 7 and 8). To connect to the computer attached to port 3 on LINDY CPU Switch B
the user would hold down the hotkey keys then press

followed by

, whilst keeping the hotkey
keys pressed. This will have the effect of connecting to port ‘3’ of the LINDY CPU Switch which is
connected into port ‘2’ of the first LINDY CPU Switch unit A. (Note: if you are cascading 16 port
models then you will need to type a leading 0 before all single digit port numbers).
For example to connect to port 3 on the LINDY CPU Switch cascaded off port 2 of your first LINDY
CPU Switch use:
press
ts
release


press

release
ts
For example to connect to port 14 on the LINDY CPU 16 OSD Switch cascaded off port 1 of your
first LINDY CPU 16 OSD Switch use:
press
ts
release


press

release

press

release

press

release
ts