Lenovo ThinkCentre 41N5626 - Manual (Page 36)

Refer to the documentation that comes with your computer for additional details on selecting IDE
performance modes.
v The disc cannot be read.
Take the following actions:
1. The disc might be dirty; clean it as described in “Handling and caring for a disc” on page 3-3.
2. The disc might be defective; try another disc.
3. The disc is not ISO-9660, High Sierra Group (HSG), or Universal Disc Format (UDF) compatible.
Check with your place of purchase.
v DVD+R DL and DVD-R DL media cannot be read in other computers after burning.
Take the following actions:
1. Check with your manufacturer to be sure that the drive can read DVD+R DL and DVD-R DL
media.
2. Follow this procedure to enable IMAPI for Windows XP:
a. Double-click My Computer .
b. Right Click on the DVD reader drive, and select Properties .
c. Click Recording .
d. Mark the Enable CD Recording on this drive checkbox.
e. Click Apply .
3. Try installing the UDF reader in the other computer.
v There is no sound from the disc.
1. Check that you are not using a data CD.
2. Adjust the audio-adapter volume control. See the documentation that comes with your audio
adapter and audio-CD player program.
3. Enable digital audio extraction. For more information, see “Enabling digital audio extraction for
Windows 2000” on page C-2
v You receive an error message.
Take the following actions for these common error messages:
– CDR-103
The disc in the Super Multi-Burner Drive is not High Sierra, ISO 9660, or UDF format.
The Super Multi-Burner Drive does not support the media.
– CDR-101
A ″not ready reading the drive ″ situation occurs when you try to access the Super Multi-Burner
Drive before the drive is ready. The busy indicator lights when you attempt to access the drive after
loading a disc into the loading tray. Wait until the busy indicator is no longer lit before attempting
to access the drive.
v The Super Multi-Burner Drive does not operate and will not allow the disc to eject .
You will need to manually eject the disc. Refer to “Manually ejecting a disc” on page 3-2.
v A direct-to-disc media occurred and you cannot eject the disc or shut down the computer.
Take the following actions:
1. Wait a few minutes until the drive light flashes and goes out, then try again.
2. Emergency eject the disc. Open Task Manager and end the task, DLAWCRTL.EXE. Then shut
down.
v Your Super Multi-Burner Drive showed up in My Computer until you added additional software,
but is no longer in My Computer
1. Uninstall all CD recording related software, including Windows Media Player.
B-2 ThinkCentre and Lenovo Super Multi-Burner Drive (Serial ATA) User’s Guide