LG RH7850H - Manual (Page 11)

11
Hookup and
Settings
Connecting to the Aerial
Remove the aerial cable plug from your TV set and
insert it into the aerial socket at the back of the
recorder. Plug one end of the aerial cable into the TV
socket on the recorder and the other end into the
aerial input socket on your TV set.
RF coaxial connection
Connect the RF. OUT jack on the recorder to the
aerial input jack on the TV using the 75-ohm Coaxial
Cable supplied (R). The RF. OUT jack passes the
signal through from the AERIAL jack.
ANTENNA
INPUT
Aerial
Rear of the recorder
Rear of TV
L R
AUDIO INPUT VIDEO
INPUT
SCART INPUT
R
Rear Panel
Hookup and Settings
a AERIAL
Connect the aerial to this terminal.
b AUDIO OUT (Left/Right)
Connect to a TV with audio inputs.
c VIDEO OUT
Connect to a TV with video inputs.
d COMPONENT VIDEO OUT/PROGRESSIVE
SCAN (Y Pb Pr)
Connect to a TV with Y Pb Pr inputs.
e VIDEO OUTPUT Switch
Select either COMPONENT VIDEO OUT or RGB
signal of EURO AV1 AUDIO/VIDEO terminal
depending on how you connect the recorder to the
TV.
f EURO AV 1 AUDIO/VIDEO
Connect to a TV with SCART jack.
g EURO AV 2 DECODER
Connect the audio/video output of an external
source (Pay-TV decoder, Set Top Box, VCR, etc.).
h OPTICAL (Digital audio out jack)
Connect to digital (optical) audio equipment.
i HDMI Connector (Type A)
HDMI output providing a high quality interface for
digital audio and video.
j Cooling fan
k AC Power Cord
Plug into the power source.
l RF. OUT
Passes the signal from the AERIAL to your
TV/monitor
m AUDIO IN 3 (Left/Right)
Connect the audio output of an external source
(Audio system, TV/Monitor, VCR, Camcorder).
n VIDEO IN 3
Connect the video output of an external source
(Audio system, TV/Monitor, VCR, Camcorder).
o COAXIAL (Digital audio out jack)
Connect to digital (coaxial) audio equipment.
a b c d e f g h i j k
l m n o