LG RH7850H - Manual (Page 30)

30
3D Surround
This unit can produce a 3D Surround effect, which
simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five or
more speakers normally required to listen to multi-
channel audio from a home theater system.
1. Press 3D SURR. then press b / B repeatedly
during playback to select [3D SUR.].
2. To turn off the 3D Surround effect, select
[NORMAL].
Subtitles
Press SUBTITLE then press b / B repeatedly during
playback to see the different subtitle languages.
Instant Skip
Each press I.SKIP skips forward 15 seconds.
In HDD playback or Timeshift mode, each press b / B
skips forward or reverse 5 minutes.
Note:
If appears, the feature is not available on the disc.
Finding Locations on a Disc
You can directly access any point on a video CD
using this function. Use this function only while a
video CD is playing. Playback jumps to the point
specified.
1. Press SEARCH during playback.
The progress bar appears on the TV screen.
2. Use b / B to find a start position for playback.
3. Press ENTER to confirm the selected position.
Playback starts from the selected position.
Note:
This function works only when no marker is
memorized.
Last Condition Memory
This recorder memorizes the user settings for the last
disc that you have viewed. Settings remain in memory
even if you remove the disc from the recorder or
switch off the recorder. If you load a disc that had its
settings memorized, the latest stop position is
automatically recalled.
Notes:
– Settings are stored in memory for use any time.
– This recorder does not memorize settings of a disc
if you switch off the recorder before commencing to
play it.
PIP (Picture in Picture)
This function enables you to view the stored stations
in sub picture during playback.
On and off
Press PIP to switch on the sub picture, press this
button again to switch it off.
Input mode selection for sub picture
Press AV to select the input mode for the sub
picture. Each time this button is pressed, each input
mode for the sub picture is displayed as shown
below.
Tuner
→ AV1 → AV2 → AV3 → AV4
Program selection for sub picture
Use v / V to change the program when sub
picture’s input is set to tuner. The selected program
number is displayed on the TV screen. You can
view the selected program by pressing STOP (x).
Sub picture position change
Press b / B repeatedly until desired position is
achieved. The sub picture moves clockwise or
counterclockwise.
Zoom Sub picture
Press ZOOM repeatedly to enlarge the sub picture,
the magnification level increases up to three steps.
VCD DVD +R -R +RW -RW Video
-RW VR HDD
DVD
VCD
DVD +R -R
+RW -RW Video -RW VR HDD
DivX DVD
DivX VCD DVD +R
-R +RW -RW Video -RW VR