Lanier 5625 - Manual (Page 121)

109
5. What to Do If Something
Goes Wrong
If Your Machine Does Not Operate as You
Want
Check the following:
Condition Action
Nothing happens when
the operation switch is
turned on. Is the main power switch turned on?
→
Turn on the main power switch.
B Paper tray is empty. Load paper.
⇒
P.114 “B Loading Paper”.
D Toner container is al-
most empty. Or toner
container is empty. Add toner.
⇒
P.116 “D Adding Toner”.
M Doors/covers are
open. Close the doors/covers.
x Misfeed occurs. Remove misfed paper.
⇒
P.118 “x Clearing Misfeeds”.
d The machine in-
structs you to add sta-
ples. Add staples.
⇒
P.121 “d Adding Staples”.
The machine instructs
you to enter your user
code. The machine is set for user code mode. Enter your user
code.
⇒
P.14 “When the machine is set for user codes”.
The Energy Saver indi-
cator is on. Your machine is in Energy Saver mode.
→
Press the { Energy Saver } key. ⇒
P.51 “Energy Saver Mode”.
Misfeeds occur fre-
quently. Is the right kind of paper in the paper tray?
→
Paper size and weight must be within the specifications
for this machine.
Is folded, wrinkled, damp, or curled paper in the paper
tray?
→
Always use dry, undamaged paper.
Is the paper properly set in the paper tray?
→
Always load paper correctly.
Are there any pieces of misfed paper or other foreign ob-
jects in the machine?
→
Make sure that the paper path is completely clear of pa-
per and other material after a misfeed.