Lanier 5625 User Manual
Page 150
Changing the Machine's Settings
138
6
Margin Adjustment
You can adjust the margin width that is selected as a de-
fault in Margin Adjust mode. You can change this setting
as follows:
A
Select the margin direction with the <> keys.
B
Enter the margin width with the number keys. Then
press the
[OK]
key.
Metric version: left/20mm - right/20mm in 1mm
steps
Inch version: left/0.8" - right/0.8" in 0.1" steps
Note
❒ Default:
• Metric version: left/10mm
• Inch version: left/0.4"
Set User Ratio
Up to 2 reproduction ratios which you frequently use
can be registered.
A
Select
[Ratio1]
or
[Ratio 2]
with the <> keys.
B
Enter the ratio with the number keys. Then press the
[OK]
key.
Note
❒ Default: 100 %
Initial Mode Set
You can set the machine to recall program setting when
the machine is turned on or when modes are cleared.
Note
❒ Default: Normal
❒ Your service representative can store the program set-
ting.
❒ Your service representative can select whether the
program setting is recalled when the machine is
turned on or when modes are cleared.
Key Operator Tools
Use these tools to manage use of the machine.
Note
❒ Enter a previously registered key operator code with the number keys.
Reference
For details
⇒
P.131 “System settings”.
Menu
Description