Lowrance electronic LCX-111C - Manual (Page 167)

159
3. Expand any categories that might contain data you want to display.
Then press
↓ or ↑ to select a data option.
4. With the data option highlighted, press ENT to check it (turn it on) or
uncheck it (turn it off). As you turn it on, the data will appear on top of
the screen. Every Page display has a maximum number of items you
can show using the Overlay Data command.
5. After the desired changes are made, press EXIT | EXIT to return to the
page display.
To remove overlaid data:
1. While on the Page display that shows the item or items you want to
remove, press
MENU | ↓ to O
VERLAY
D
ATA
| ENT .
2. You'll see a list of the overlay data currently displayed. Select the
item you want to remove from your display and press
ENT | ENT to
remove the data. To remove another item, select the item and press
ENT | ENT.
3. When you have finished removing all the items you want from the
screen, press
EXIT to return to the page display.
Overlay Data Shown, with bearing selected (left). Press ENT to access
R EMOVE
option (right). Press ENT again to remove item and return to
the Overlay Data Shown screen.
To move overlaid data:
You may find it useful to rearrange data floating in your display
window.
1. Press MENU |
↓ to
O
VERLAY
D
ATA
| ENT .
2. You'll see a list of the overlay data currently displayed. Select the
item you want to move and press
ENT |
→ to
M OVE
| ENT .
3. The data begins to flash on your screen. Use any combination of
→
,
← ,
↑ and ↓ to move the data to a new location.
4. When satisfied, press EXIT | EXIT.