Lowrance electronic LCX-111C - Manual (Page 175)

167
To set the Year: Press ↓ and →
to Y
EAR
| ENT. Press
↑ or ↓ to select the
year, then press ENT.
You also may switch the Time Format between 12 and 24-hour options.
The Date Format also may be modified between three options:
Month/Day/Year, Day/Month/Year and Year/Month/Day.
Time Settings Menu.
At the bottom left of the menu is the C ONFIG DST button. This feature
allows your unit to automatically adjust with the time change caused
by Daylight Saving Time. It should only have to be set once. You may
select which set of rules matches DST in your region or simply accept
the default.
Once you have each field set the way you want, press EXIT repeatedly to
return to the previous page.
Show WAAS Alarm
When the signal is available, your unit will automatically use WAAS to
boost the accuracy of the position fix. When the WAAS signal is lost or
acquired, an alarm message appears. Since the U.S. government is still
developing the WAAS system, it's not unusual for a GPS/WAAS
receiver to frequently lose and reacquire its lock on a WAAS satellite.
That can result in the alarm repeatedly going on and off. You have the
option of turning off the WAAS Acquired/Lost alarm without affecting
how the unit uses WAAS. Here's how:
1. Press
MENU | MENU | ↓ to GPS S
ETUP
| ENT | ↓ to S
HOW
WAAS A
LARM
.
2. With the option highlighted, press ENT to uncheck it (turn off) or
check it (turn on). After the option is set, press EXIT | EXIT to return to
the page display.
3. You can return to this command and press
ENT again to turn on the
feature.