LSI 7102XP-LC - Manual (Page 45)

Physical Characteristics 2-27
Copyright © 2002 - 2005 by LSI Logic Corporation. All rights reserved.
2.8.18 LSI7402EP Connectors and Indicator LEDs
The LSI7402EP I/O bracket is configured as shown in Figure 2.18 . The
Port 0, Port 1, Port 2, and Port 3 connectors provide the connections from
the adapter channels to the FC subsystem. The indicator LEDs indicate
link status, activity, and link fault.
Figure 2.18 LSI7402EP Connectors and Indicator LEDs
Table 2.15 describes the LSI7402EP Link Activity/Link Fault LED
appearance that indicates a valid link, presence of link activity, or a fault
on the link.
Table 2.15 LSI7402EP Link Activity/Link Fault LEDs
Link Activity Fault
LED Appearance Off Green Blinking Yellow
Port 0
Port 2 LED
Port 1
Port 0 LED
Port 3 LED
Port 1 LED
Port 2
Port 3