LSI 7102XP-LC - Manual (Page 76)

4-18 BIOS Features
Copyright © 2002 - 2005 by LSI Logic Corporation. All rights reserved.
ok 1 set-topology
Topology selected is NL_Port
Topology has been set
Change will take effect after system power cycle
ok 2 set-topology
Topology selected is N_Port
Topology has been set
Change will take effect after system power cycle
ok a set-topology
Topology selected is auto
Topology has been set
Change will take effect after system power cycle
Note: The system must be power-cycled before the changes take
effect. It is not sufficient to execute the reset-all command.