2 quick installation procedure, Quick installation procedure – LSI 7102XP-LC User Manual
Page 14
1-2
Installation Procedures
Copyright © 2002 - 2005 by LSI Logic Corporation. All rights reserved.
1.2
Quick Installation Procedure
This section provides an overview of the installation procedure. If you are
an experienced computer user with prior host adapter installation and FC
setup experience, this section may describe the procedure sufficiently. If
you prefer more detailed guidance for installing the host adapter, proceed
to
Section 1.3, “Detailed Installation Procedure.”
For safe and proper installation, refer to the user’s manual supplied with
your computer and perform the following steps:
Step 1.
Ground yourself before removing this host adapter board.
Step 2.
Remove the host adapter from the packaging and check that it
is not damaged.
on
illustrates an example of this host
adapter board. Also refer to
to see more detailed drawings of the
2 Gbit/s host adapter boards.
Step 3.
Open your PC cabinet and select an appropriate open PCI slot.
Step 4.
Insert the host adapter board.
Step 5.
Make any configuration changes.
Step 6.
Close your PC cabinet cover.
Step 7.
Connect the FC cable to the host adapter.