LSI 7102XP-LC - Manual (Page 64)

4-6 BIOS Features
Copyright © 2002 - 2005 by LSI Logic Corporation. All rights reserved.
4.4.5 Global Properties Menu
The Global Properties menu allows you to pause if an alert message has
been displayed, to view display boot information, and to set display and
video modes.
4.5 Exiting the LSI Logic Boot BIOS Configuration Utility
The Exit menu for the LSI Logic boot BIOS configuration utility is used
for all six of the menus listed in
Section 4.4, “Main Menu,” page 4-3 .
However, the available functionality is different for the Main menu and the
five subordinate menus.
To exit from the Adapter Properties, Persistent ID, Device Properties,
Boot Adapter List, or Global Properties menus, use the following
exit options:
To exit from the Main menu, use the following exit options:
Important: If you reboot the system without properly exiting from this
utility, some changes may not take effect.
4.6 Troubleshooting
The LSI Logic boot BIOS Configuration Utility is a powerful tool. If you
disable all of your controllers while using it, pressing CTRL+A or
Cancel exit Returns you to the previous menu.
Save changes then
exit this menu Implements any changes you made on the previous
menu and returns you to the Main menu.
Discard changes
then exit this menu Restores the default settings and returns you to the
Main menu.
Cancel exit Returns you to the Main menu.
Exit the Configuration
Utility Exits the configuration and automatically reboots your
system.