Chapter 4: advanced configuration, Setup, System > system settings – Linksys SLM2005 User Manual

Page 9: Setup system > system settings, Chapter, Chapter : advanced confguraton, Advanced configuration

Advertising
background image

Chapter 

Advanced Configuration

5

5-Port and 8-Port 10/100/1000 Ggabt Smart Swtches wth PD and AC Power

Chapter :
Advanced Confguraton

Open your web browser and enter http://19.168.1.5
into the address field. Press the Enter key and the Password
screen will appear.

Address Bar

NOTE:

The default IP address is 19.168.1.5.

If the IP address has been changed, enter the
assigned IP address instead of the default.

The first time you open the web-based utility, enter admn
(
the default username) in the username field and enter

admin

as the password. Click the OK button. You can set

a password later from the System > System Settings screen.

Login Screen

Setup

The first screen displayed upon login is the System Settings
screen. There are 10 options across the top of the screen:
System, Port, VLAN, Securty, QoS, STP, Statstcs,
Multcast, Admn and Logout. Each option contains
screens that will help you configure and manage the
Switch.

System > System Settings

The System > System Settings screen displays a summary of
Switch information.

System > System Settings

System Name

This field allows you to enter/modify the

name of the Switch.

System Locaton

This field allows you to enter/modify

the location name of the Switch.

MAC Address

The MAC address of the Switch is displayed

here.

S/W Verson

The software version of the Switch is

displayed here.

IP Address

The IP address assigned to the Switch is

displayed. The default IP address is 19.168.1.5.

Subnet Mask

The Subnet Mask assigned to the Switch is

displayed. The default is 55.55.55.0.

Default Gateway

Displays the IP address of the gateway

between this device and management stations that exist
on other network segments. The default value is 0.0.0.0.

DHCP Server

The IP address of the DHCP server.

Enable DHCP

When enabled, the Switch will attempt to

obtain an IP address from a DHCP server on your network.
If an IP address is not obtained, the Switch will use the IP
address defined in the IP Address field below.

IP Address

The IP address assigned to the Switch

can be modified in this field. The default IP address is
19.168.1.5.

NOTE:

If the static IP address is changed, the

Switch will automatically log you out of the
web-based utility. To log back in, you must use
the new Static IP address.

Subnet Mask

The Subnet Mask assigned to the Switch can

be modified in this field. The default is 55.55.55.0.

Default Gateway

The IP address of the gateway can be

modified in this field. The default is 0.0.0.0.

Management VLAN

Enter the ID of the configured VLAN

(1-4094, no leading zeroes). By default, all ports on the
Switch are members of VLAN 1. However, the management
station can be attached to a port belonging to any VLAN,
as long as that VLAN has been assigned an IP address.

Username

Specifies the username. The default username

is admn. Only one admin user is allowed.

Password

A new password can be entered in this field.

The password is not displayed as it is entered. Each
character is displayed as a bullet in the password field.

Web Admn Tmeout (secs)

As a security measure, the

web-based utility will timeout after being idle for the
amount of time defined in this field. If the Switch is idle
for the amount of time defined here, login is required
to return to the web-based utility. The time is entered in
seconds. The default value is 00 seconds.

Advertising
This manual is related to the following products: