Lincoln VANTAGE 500 - Manual (Page 9)

TECHNICAL SPECIFICATIONS - Vantage 500 CUMMINS (K2272-1)
INPUT - DIESEL ENGINE
Make /Model Description Speed (RPM) Displacement Starting Capacities
System
Cummins 4 cylinder High Idle 1900 199 cu. in 12VDC battery Fuel
B3.3 56HP (42 kw) Low Idle 1425 (3.3L) & Starter (25 US gal)
Diesel Engine @ 1800 RPM Full Load 1800 94.6L
Bore x Stroke Oil:
(2 US gal)
3.74” x 4.53” 7.5L
(95mm x 115mm) Coolant:
(2.6 US gal)
11.8L
RATED OUTPUT @ 104°F(40°C) - WELDER
Duty Cycle Welding Output Volts at Rated Amps
100% 500 Amps (DC multi-purpose) 40 Volts
60% 550 Amps (DC multi-purpose) 36 volts
50% 575 Amps (DC multi-purpose) 35 volts
PHYSICAL DIMENSIONS
Height (2) Width Depth Weight
42.0 in 31.5 in. 63.1 in. 1605 lbs.
(1066.8 mm) (800.1mm) (1603mm) (728kg)
(Approx)
1. Output rating in watts is equivalent to volt-amperes at unity power factor.
Output voltage is within +/- 10% at all loads up to rated capacity. When welding, available auxiliary power will be reduced.
2. Top of Enclosure. Add 8.8” (223.5mm) for exhaust.
OUTPUT @ 104°F(40°C) - WELDER AND GENERATOR
Welding Range
30 - 575 Amps CC/CV
20 - 250 Amps TIG
Open Circuit Voltage
60 Max OCV @ 1900 RPM
Auxiliary Power (1)
120/240 VAC
12,000 WATTS, 60 Hz.
A-1 INSTALLATION A-1
Vantage 500 CUMMINS