Lexmark 3400 Series - Manual (Page 60)

Remove and then load paper.
Check the ink level, and install a new print cartridge if necessary.
1 Remove the print cartridge.
2 Make sure the sticker and tape have been removed.
3 Reinsert the print cartridge.
Make sure the printer is set as the default printer and is not on hold or paused.
1 Click:
• In Windows XP Pro: Start Œ Settings Œ Printers and Faxes.
• In Windows XP Home: Start
Œ
Control Panel
Œ
Printers and Faxes.
• In Windows 2000: Start Œ Settings Œ Printers.
• In Windows 98/Me: Start Œ Settings Œ Printers.
2 Double-click the name of your printer.
3 Click Printer.
• Make sure no check mark appears next to Pause Printing.
• Make sure a check mark does appear next to Set As Default.
1 Press to turn the printer off.
2 Disconnect the power cord from the wall outlet.
3 Gently remove the power supply from the printer.
4 Reconnect the power supply to the printer.
5 Plug the power cord into the wall outlet.
6 Press to turn the printer on.
1 Uninstall the printer software, and then reinstall it. For more information, see “Removing and reinstalling the
software” on page 74.
2 If the software still does not install correctly, visit our Web site at www.lexmark.com to check for the latest
software.
a In all countries or regions except the United States, select your country or region.
b Click the links for drivers or downloads.
c Select your printer family.
60