Lexmark 3400 Series - Manual (Page 69)

3 Press to turn the printer back on.
Paper or specialty media misfeeds
If paper or specialty media misfeeds or skews, or multiple sheets feed or stick together, try the following solutions.
Load a smaller amount of paper into the printer.
See “Loading various paper types” on page 27 for information about:
• Maximum loading amounts per paper type
• Specific loading instructions for supported paper and specialty media
Load paper with the print side facing you.
Remove each page as it exits, and let it dry completely before stacking.
Use only new, unwrinkled paper.
Adjust the paper guides:
• When using media less than 8.5 inches wide
• Against the left edge of the paper or media, making sure it does not buckle
Printer does not feed paper, envelopes, or specialty media
If there is a paper jam, see the appropriate paper jam section.
Verify that the specialty media is loaded correctly.
Try loading one page, envelope, or sheet of specialty media at a time.
Make sure the printer is set as the default printer and is not on hold or paused.
1 Click:
• For Windows XP Pro: Start
Œ
Settings
Œ
Printers and Faxes.
• For Windows XP Home: Start Œ Control Panel Œ Printers and Faxes.
• For Windows 2000: Start Œ Settings Œ Printers.
• For Windows 98/Me: Start
Œ
Settings
Œ
Printers.
2 Double-click the name of your printer.
3 Click Printer.
• Make sure no check mark appears next to Pause Printing.
• Make sure a check mark does appear next to Set As Default.
Banner paper jams
1 Press to turn off the printer.
2 Remove the jammed banner paper from the printer.
69