Lindy 32354 - Manual (Page 59)

LINDY CPU Switch Dual Multi-Platform Installation and Use Page 58
additional rows (up to 512 computers). The ADMIN user will always be granted
access to all computers regardless of the values entered.
USERS ADMIN Alan Jim Sue Test
PASSWORDS password letmein hello logmein Test
COMPUTERS PORT
Admin PC 2103 1 1 1 1
Alan's System 2102 1 1 1
Comms Server 3 1 1
Comms PC 4 1 1 1 1
Gateway 1 8 1
Gateway 2 5 1
Test System 15 1 1
Web Browser 9 1 1 1
To restore the saved / edited menu and configuration settings:
1. Connect the serial port on the rear of the LINDY CPU Switch Dual MP to a serial
COM port on your computer using the serial cable supplied with the LINDY CPU
Switch.
2. Copy the program LDYWRITE and LDYDATA.CSV into the same directory on the
PC that is connected to the LINDY CPU Switch’s serial port.
3. Run the program LDYWRITE.EXE and follow the instructions given by the
program.
4. Make sure that you are logged onto the LINDY CPU Switch as the ADMIN user.
From the main selection screen press F1 for More Menus . In the Configuration
Menu select Functions . In the Functions menu select Read Data from RS232
port.
5. The LINDY CPU Switch should then receive the configuration data to your
computer and load the new menu names and access rights into the menu.
4.20 Switching channels by sending RS232 data
You can switch the LINDY CPU Switch Dual MP remotely by sending RS232 data to
the serial communications port (located on the rear panel adjacent to the power